Block containers (block modules, trailers) - the most advanced solution in the manufacture of prefabricated modular buildings. Block modules, like a children's designer, allow you to quickly mount buildings of different configurations, adapting them to your needs. The design of the block module allows you to change the location of windows, doors, add the required number of modules, install them in two or even three floors, thus obtaining modular buildings.
Meet all the requirements of the legislation DSTU B B.2.2-22: 2008, safety classes, have certificates of conformity and sanitary certificates for each car.
For ease of transportation, the width of the car can reach 2,435 m, length up to 12.5 m, height up to 2.8 m.
If according to the technical characteristics the dimensions of the car exceed the allowable ones, an additional permit for transportation of oversized cargo is additionally issued.
It is possible to plan the internal space of the premises with the help of internal partitions with interior doors.
Block containers are insulated according to the climatic zone of the installation site with non-combustible insulation, 50 to 200 mm thick.
Optional cars can be equipped with:
The warranty on the manufactured products is up to 24 months.
If you decide to order a modern modular block container in Kyiv, Odesa, Dnipro, Kharkiv, Chernihiv, Lviv or other regions of Ukraine, you can call our number listed in Contacts.
Block-containers are equipped with heating, air conditioning, ventilation, water supply and sewerage systems with the ability to connect to the transit power supply when combined into towns.
Block-containers are designed for high dynamic loads that occur during transportation in off-road conditions, numerical unloading and loading.
The cabins correspond, depending on the size, safety class CC1 and the degree of fire resistance IIIA. By special order, the fire resistance class can be increased to EI30.
Living block-containers designed for temporary or permanent residence in country areas, directly near the work site.
At the request of the customer conditioners, convectors for heating in a cold season are established in living containers.
Depending on the size block-modules can be equipped with single or bunk beds made by our company. If necessary, the beds can be equipped with drawers for storing personal belongings, which is fixed when moving.
The living cabin can be equipped with cabinets for storage, sanitary unit, which may include a shower or hydrobox, toilet, sink, boiler.
The office block module is designed for convenient work of department heads, holding meetings, gatherings, etc.
Office block-containers can be additionally completed with furniture made by our company: chairs, cabinets, chairs.
The interior is made of laminated chipboard, PVC panel, corrugated board.
It is possible to connect office module to the mains and prepare for connection to the Internet. The basic version provides for the installation of two two-post sockets (if necessary, their number can be increased), switch, lamps, etc.
Sanitary block modules are intended for use as showers, toilets (toilets).
Sanitary block-containers are completed with shower cabins, wash basins, toilet bowls, bowls of Genoa. It is planned to install boilers, pumping stations, water tanks of various volumes up to 5 cubic meters. At the request of the Customer instead of shower cabins hydroboxes can be established.
In sanitary cabins water is connected via a coupling built into the water supply system outside the block module in the wall or through a hatch in the floor. Water and sewage distribution is mounted in an open way. The connection of water pipes is carried out by soldering.
If necessary, ladders for draining water are installed in the floor. Sewage outlet in modular toilets is carried out by a sewer plastic pipe with a diameter of 110 mm if lavatory pan was installed.
Possible flooring options: linoleum, non-slip coating or tile.
Non-standard block containers are used as control units for solar power plants, control points for gas transmission systems, control module for cellular communication towers, security posts, warehouses, SAF, kiosks, premises with equipment for weight complex control, etc.
Features of this type of block modules are non-standard dimensions, interior and exterior finishes, design solutions that differ from the standard type of cars.
The terms of production of block-containers depend on the area of the object, the complexity of the project and the necessary means of communication that will be connected in each block container.
Since the work on the construction of an object can last a long period - several weeks or months, it is necessary to provide the working team with comfortable conditions for temporary residence and production activities.
Our company has production experience since 2004, providing a wide range of services from design to the construction of entire modular towns, providing each block container with the necessary communications.
We manufacture block-containers in Ukraine, and do not import block-containers from abroad, so the price of a modular building is affordable and competitive on the market.
To ensure the comfort of the client, the delivery of modular units delivered to the installation site by own transport will be organized, which will already be included in the price.
The price of a block-container is calculated and depends on the following factors:
The approximate cost of construction is from 450 u.e. /m2.
An economical option for temporary residential and household buildings are buildings made of block containers, from which quick-erect modular buildings are created.
1. A commercial proposal for the production of block-containers is drawn up and agreed.
To do this, you can send a request for a cost calculation to our e-mail, indicating the orientation plan, area, purpose of the building, territorial location, presence of a foundation, finishing materials outside and inside the building, and other individual wishes.
2. A sales contract is drawn up with clearly specified delivery dates. In addition to the contract, the buyer is issued an invoice or a cash order based on which payment is made.
3. Making payment. The standard advance payment is 70% of the total cost of the product. Cashless payment to the company's official account is possible.
4. Production of block-containers.
5. Upon completion of delivery and installation of the buildings, the act of acceptance and handover is signed, the remaining 30% of the contract price is paid, the technical passport and keys are handed over to the buyer.
6. The warranty for the manufactured modular building is 2 years.
In addition, you can call by phone to clarify all questions.
The company's experience allows us to produce mobile modular homes, cabins, trailers, country houses of any complexity.
Container-type prefabricated buildings have been completed in such cities as Kharkiv, Dnipro, Chernihiv, Kyiv, Kyiv region, Cherkassy, Lviv, Odessa, Vinnytsia, and others.
The delivery of ready-made block-containers can be carried out by our transport, and in addition, the installation of the block-containers by an on-site brigade is organized.
Delivery of the block-containers is included in the price.
Production of prefabricated modular buildings, block-containers, rotational modular camps, cabins
